Handbrakes
SERVIT Handbrakes
All our models Brake levers for agricultural trailers
Handbrake system lever for farm trailers. System approved with the trailer when it is inspected for roadworthiness.
We can supply Certificates of Compliance on request. They contain all the calculations required for requesting approval (power ratios, tractive power...)
There are several brake lever models. On this site you will find information about each model.
Supplied with rust-proofing primer. Dichromate zinc treatment possible.
Please feel free to contact us if you have any specific questions or require special operations: securing holes, different handle lengths…
Our handbrake
Handbrake n°1
Technical caracteristics :
- Total lenght of lever : 500 mm
- Diameter of tooth sector : 240 mm
- Steel sector, cross-section 20 x 10 , profiled with milling cutter,
- Long arm in 30 x 10 flat iron
- Pulling yoke in 20 x 4vmm flat iron
- Interlock preventing loosening
- Weight : 2,500 kg
Pulling yoke travel :
- Lower hole : 70 mm
Options available for this lever :
- Galvanization
- Drilling
Handbrake n°2
Technical characteristics :
- Total length of the lever : 600 mm
- Diameter of the toothed sector : 265 mm
- Steel sector, section 20x10 cut with strawberry
- Handle of the lever in flat iron 30x10
- Flat iron pull coping 20x4
- Security lock preventing loosening
- Weight of the lever : 3,00 Kg
Pulling yoke travel :
- Upper hole : 90 mm
- Bottom hole : 70 mm
Option available for this lever :
- galvanizing
- drilling
Handbrake n°3
Technical characteristics :
- Total length of the lever : 600 mm
- Diameter of the toothed sector : 265 mm
- Steel sector, section 20x10 cut with strawberry
- Handle of the lever in flat iron 30x10
- Flat iron pull coping 20x4
- Security lock preventing loosening
- Weight of the lever : 3,00 Kg
Pulling yoke travel :
- Upper hole : 90 mm
- Bottom hole : 70 mm
Option available for this lever :
- galvanizing
- drilling
Handbrake n°3 special
Technical characteristics :
- Total length of the lever: 700 mm
- Diameter of the toothed sector: 265 mm
- Steel sector, section 20x10 cut with strawberry
- Handle of the lever in flat iron 30x10
- 25x4 flat iron draft coping
- Security lock preventing loosening
- Weight of the lever: 3,200 Kg
Pulling yoke travel :
- Upper hole: 85 mm
- Bottom hole: 63 mm
Option available for this lever :
- galvanizing
- drilling
Handbrake special
Technical characteristics :
- Total length of the lever: 700 mm
- Diameter of the toothed sector: 265 mm
- Steel sector, section 20x10 cut with strawberry
- Handle of the lever in flat iron 30x10
- 25x4 flat iron draft coping
- Security lock preventing loosening
- Weight of the lever: 3,200 Kg
Pulling yoke travel :
- Upper hole: 85 mm
- Bottom hole: 63 mm
Option available for this lever :
- galvanizing
- drilling
